Foundations Without Concrete or Excavation
- 2,500+ projects in 10+ countries, 25 years of manufacturing experience
- Product supply or full turnkey delivery, from soil testing to installation
- Manufactured under EN 1090. Up to 50% less than concrete foundations.
Foundations Don't Have to Cost That Much
- No excavation or spoil removal needed
- No concrete, curing time, or frost insulation
- Building starts immediately after installation
- Fewer work phases reduce your total costs
- Compact equipment, minimal site preparation
- Often completed in a single site visit
- Zero concrete means dramatically lower CO₂
- Minimal site disturbance, low impact process
- 100% removable, reusable, recyclable
Piles for Every Scale
From utility-scale solar parks to a garden deck.
Two product ranges, one quality standard.
PRO Piles
Machine-installed foundations for commercial, industrial, and infrastructure projects. Custom sizes available for demanding load requirements.
per pile
- ✓ Available in S355/S420 and S550 steel
- ✓ Custom sizing for any project requirement
- ✓ Full turnkey installation available
HELIX Piles (DIY)
Install your own foundation by hand or with a handheld pile driver. Ideal for decks, fences, garden buildings, piers, and small structures.
guarantee
- ✓ Install by hand or with a handheld pile driver
- ✓ Standard lengths from 0.70m to 3.20m
- ✓ Hot-dip galvanized steel
Every pile is available in two steels: S355/S420 structural and S550 high-tensile. Tell us the loads and the ground and we recommend the right grade for your project.
See the steelsThe Right Foundation for Every Application
A garden deck or a 110 kV power line. Same technology.
Buildings: Industrial to Residential
- Industrial and commercial buildings
- Warehouses, halls and logistics centres
- Garages, carports and auxiliary buildings
- Modular and prefabricated structures
- Houses, extensions and holiday cabins
Energy and Utility Infrastructure
- Solar parks and renewable energy
- BESS and energy storage
- Power lines and substations
- 5G and telecom masts
- Oil, gas and district heating pipelines
- EV charging stations
Outdoor and Waterfront Structures
- Decks, terraces and patios
- Piers, docks and waterfront structures
- Fencing, gates and shelters
- Nature reserves and protected areas
- DIY and small contractor projects
Infrastructure and Transport
- Road and rail portals and gantries
- Signage, billboards and lighting poles
- Noise barriers and protective canopies
- Soft soils, peatlands and remote locations
- Agricultural structures
Engineered Quality.
Lower Environmental Impact.
Manufactured in Portugal and Finland under ISO 9001 and EN 1090 quality systems, because we want to control every batch ourselves. 78% lower CO₂ than concrete foundations. Every pile is load-tested on site and backed by full documentation, because load capacity must be verifiable at installation and afterwards.
Every installation is documented with pile driving reports and torque verification records.
If soil testing or test piling shows that helical piles are not suitable for your site, we will tell you straight.
Engineered for Structural Performance
- Load capacity over 1,000 kN per pile
- High-strength, low-emission steel
- EN 1090 certified manufacturing
- Load capacity verified during installation
Certified at Every Step
- ISO 9001/14001 certified processes
- Material certificates available for every delivery
- Traceable from raw material to your site
- Comprehensive pile driving reports
- Full technical documentation
Lower Environmental Impact
- 78% lower CO₂ emissions
- Zero concrete
- Minimal ground disturbance
- 100% recyclable steel foundation
Proven Foundations Across Europe
Real projects, verified results.
Santa Katharina, Comporta
A CLT villa complex raised on around 300 helical piles in sandy ground. Fast installation with no excavation, protecting the dunes and pine trees.
Olympic Port, Barcelona
Helical piles installed next to the Olympic marina, in a tight urban setting with limited working space.
Private House, Cadaval
Complete helical pile foundation for a private house, ready to build on within days and with no concrete.
Your Complete Foundation Solution
From soil investigation to final installation, your project runs through one partner. Fewer interfaces, lower risk, clearer responsibility.
Soil Investigation
Accurate ground data for safe and cost-efficient design.
- Site-specific testing
- Geotechnical condition analysis
- Precise input data for foundation design
Foundation Design
Smart pile design for safe and efficient foundations.
- Load capacity calculations and pile sizing
- Code compliance documentation
- Evaluation of site-specific installability
Manufacturing
Manufactured in Portugal and Finland, with full material traceability.
- EN 1090 certified production
- High-strength, low-emission steel
- Comprehensive quality control
Installation
Efficient installation with real-time load capacity verification.
- Experienced installation teams
- Advanced equipment
- Quality assurance
Quality Control
Documented proof of performance.
- Installation records
- Load testing
- Complete documentation
Service Advantages:
Simple execution, reliable results.
- Coordinated delivery from start to finish
- Smooth project flow without handovers
- Verified results at every stage
Concrete Foundation or Helical Piles?
- Excavation and spoil removal
- Formwork, reinforcement and concrete pour
- Backfill and compaction
- Curing (28 days for full strength)
- Frost protection and drainage
- No excavation
- No formwork, reinforcement or concrete
- No backfill
- No curing time
- No frost protection or drainage required
With helical piles: mark pile positions, install into ground. Construction can begin.
What Professionals Say
Feedback from contractors and engineers working on real projects.
Cut Your Foundation's Carbon Footprint by 78%
Your project's sustainability targets are easier to reach when the foundation itself is part of the solution. Helical piles eliminate concrete, excavation, and heavy transport. No compromise on structural performance.
View Carbon Footprint StudyLower CO₂
No concrete production emissions. Fewer deliveries, fewer machine hours.
Minimal Site Disruption
No excavation. Low-noise, vibration-free installation. Compact machinery.
Recyclable
Fully recyclable steel. Reusable foundation. Reduced material waste.
Concrete Needed
No excavation, no pouring, no curing, no buried insulation layers.
Getting Helical Piles Is Simple
Whether you need 10 piles or 10,000, you get the same quality and the same support. Standard sizes ship from stock. Custom orders are manufactured to your specification.
Contact us directly. We ship worldwide and support your project from the first question to the last pile.
